How often should I use “Test Mode”?
The Rescue Cards feature easy "One-Press Testing" and refers to this as the "Daily Test", meaning it is designed for convenient, everyday verification. We also offer full system test mode in our new dashboard. Every device can be toggled on the dashboard to activate test mode which lasts 2 minutes for each device toggled.
Related Articles
How do I reset the Base Station alarms?
Base Stations automatically reset to standard white-light mode when an emergency is resolved. Alternatively, administrators can reset them manually from the app.punchrescue.com dashboard by clicking "Cancel Test Alert".
What do the lights on my Rescue Cards mean?
A rapid Blue blink (5 times) means the device has successfully powered up. Green indicates a successful Test Mode. Amber indicates a Level 1 silent emergency. Red indicates a Level 2 full-scale emergency. *Note: All LED colors and patterns can be ...
Why isn't my device showing up on the dashboard?
For Cards, verify the CR2032 batteries are not dead and are installed with the correct polarity. For Repeaters, ensure they are plugged in and in provisioning mode (double-press the back button if they are not showing up during setup).
What do the lights on the Base Station mean?
White indicates standard, ready mode. Red indicates an active emergency (button pressed or remotely declared). Blue indicates a water or fall alert has been triggered. *Note: All LED colors and patterns can be customized via the customer's Punch ...
What do the lights on my Repeaters mean?
The top strobe flashes during an emergency. The bottom status LED indicates system state: Blue (Initializing/Powered On), Aqua (Provisioning mode), Yellow (Connecting to Wi-Fi), Green (Connected to Wi-Fi), White (Connected to Backend/MQTT), and Red ...